For Sale

**********************************************************************

1. Rob Brown $800.00

Gerard Schultz bought two knives from Rob in 1986. On the blade Rob engraved his name, the serial number of the knife and the name of the gunshop Gerard had at that time.  The knife has been used, but one would be hard pressed to see this.  Gerard returned the knife to Rob in September 2014 and he sharpened and polished it to as new condition. The knife is in very good condition and this is an opportunity to own an early knife, from a premier knifemaker, that is every bit as good as the best he ever made. The knife is fitted and finished immaculately.

The length is: 220 mm / 8.66"

The blade is: 105 mm / 4.13"

Coachwork is brass.

Handle is Tamboti

The blade and tang is tapered towards both sides.

There is a white on black line between the handle and the tang.

The knife was made very shortly before Rob Brown joined the SA Knifemaker's Guild.

**********************************************************************

2.  Rob Brown $800.00

This is the other knife that Gerard got from Rob in 1986. On the blade Rob engraved his name and the name of the gunshop Gerard had at that time.  The knife is unused and in pristine condition.  Gerard returned the knife to Rob in September 2014 for inspection, 28 years after it was made and Rob remarked that this was the oldest knife, that he had made, that anyone has brought back to him. This is an opportunity to own an early knife, from a premier knifemaker, that is every bit as good as the best he ever made. The knife is fitted and finished immaculately.

The length is: 220 mm / 8.66"

The blade is: 105 mm / 4.13"

Coachwork is brass.

Handle is dark Wild Olive 

**********************************************************************

3.  Mick Russell $1000.00

Mick Russel was a member of the South African Knifemaker's Guild from 1987 until an accident prevented further knifemaking.  To successfully apply for membership of the Guild, a knifemaker must submit 5 knives to a panel.  If the quality is of a certain standard or above, the applicant is accepted.  The knife below is one of the 5 knives Mick submitted and is serial numbered #002. This knife was purchased from Mick in 1987 and a letter of authenticity can be obtained from Mick.

The blade is made from D2 steel, the furniture is brass and the handles are sneezewood burl.  The knife is flawlessly fitted and is an opportunity to own a unique knife from one of the best knifemakers of the time.

Overall length is 270 mm (10.63"), the handle is 117 mm (4.6")

 

**********************************************************************

4.  Mick Russell $1500.00

This knife was purchased in 1989 and appears on Mick's brochure of that time.  A brochure is supplied with the knife.  The engraving is done by Elke Henley (nee Schoenert) and the scales are M'tisa wood and micarta with furniture done in nickel silver.  The knife is serial numbered #034 and presented in a Tamboti case also made by Mick. A letter of authenticity can be obtained from Mick.

 

**********************************************************************

5.  Sean Culhane $400.00

This knife was made to commemorate an event and the full story is at http://www.gsgroup.co.za/galkendrew2007.html

**********************************************************************

6.  Tinus Beukes $300.00

This knife was bartered from Tinus at a show in 2001/2002 where both Tinus and GS Custom Bullets had a table.  It was swapped for the appropriate quantity of 9.3 mm HV bullets.

**********************************************************************

7.  1896 Swedish bayonet $100.00 Contact gerard@gscustomusa.com  

This bayonet is in very clean condition, given the age.  It is original and has not been refurbished.

 

 

 

 

 

 

 

**********************************************************************

8. Buck 500.  Knife is in South Africa.  R1000.00 Contact gerard@gscustomusa.com

**********************************************************************

9. Buck 847.  Knife is in South Africa.  R1100.00. Contact gerard@gscustomusa.com

**********************************************************************