|Bullet Number||Bore Diameter||Groove Diameter||Suitable for Calibers (Subject to twist)|
|204029SP135||5.08mm||.200"||5.18mm||.204"||All .204" calibres|
|Speed||1280m/s||4200fps||823m/s||2700fps||366m/s||1200fps||Min Impact Speed|
|Guidelines for Stability Factor, Twist Rate and COL:||
Choose a bullet length best suited to
your rifle twist and type of shooting.
Note that S/F increases as twist tightens. A 1:10" twist is tighter than a 1:12" twist.
A Stability Factor greater than 1.1 is required. Any combination of twist rate and bullet length that does not give at least that, is not suitable. SP bullets are non expanding spitser type bullets and are not recommended for hunting unless you have a specific application. For use under 500m, a Stability Factor of 1.5 or greater can be used. For distances beyond 500m the stability factor can be decreased but must never be less than 1.2. Some experimentation will be required to determine the best combination for your particular atmospheric conditions.
|COL: To determine the minimum and maximum cartridge overall length with this bullet, add the minimum or maximum values to your cartridge case length.||Minimum||11.7mm / 0.46"|
|Maximum||13.2mm / 0.52"|
On the chart to the right:
1. Select the twist rate of your rifle on the horizontal axis and read the S/F on the vertical axis.
2. Use the guidelines above to determine suitability for your application.
3. Check the caliber list for your caliber.
GS Custom Bullets, situated in Port Elizabeth on the East Coast of South Africa, manufactures solid copper, turned, monolithic bullets for hunting and sport shooting. These bullets are used by hunters on several continents, hunting from the smallest of antelope to the largest of dangerous game, using the smooth HP bullet, as well as the more popular HV, FN and SP bullets with the patented drive band concept. GSC bullets are configured for the highest possible ballistic coefficients. SP bullets are mainly used for sport shooting. All GS Custom Bullets are moly coated.